RS-23
Many Contemporary Research
products, including AV tuners
and others feature our advanced S12
COM or USB-RS-232 adapter,
one end).
RS-232 Driven Tuners
The firmware download process works simply and easily:
Download the desired firmware self
Connect the S12-
series CR product to an RS
Make sure programs such as HotSync aren't already using the RS
Also check to see if the tuner
is set to Unit 1 (hold Mute and Volume (or Select) Up for front
mode, then press Volume Up to select view mode 2 Unit # settings, use Channel Down button to set
unit to 1, if needed).
Run the EXE program, then click
When
the program connects with the tuner, you'll see the name of the product after
firmware file you are loading after
Normally, the desired firmware file is already loaded
firmware files
Click the PROGRAM
button to start the loading process. You may see
installs the firmware.
The VERIFY,
BOOT, RUN are manual operation
-
you'll rarely use them unless asked by CR Tech Support.
IC-NET Controllers –
Update Firmware Over RF Coax
There is a separate manual for updating controllers over RF through the ICC/ICE
the Display Control section of the
Downloads page at the CRWWW.com website to download the correct
manuals.
Loader
Firmware
products, including AV tuners
, QMODs, the IR-
-the-
field firmware updates using a Windows PC
-
232 null modem cable (DB7 Female to Female, TX and RX swapped at
, and other devices.
The firmware download process works simply and easily:
Download the desired firmware self
-extracting EXE file at
series CR product to an RS
-232 port and note which RS-
Make sure programs such as HotSync aren't already using the RS
-232 port.
is set to Unit 1 (hold Mute and Volume (or Select) Up for front
mode, then press Volume Up to select view mode 2 Unit # settings, use Channel Down button to set
Run the EXE program, then click
SETUP to select COM port.
the program connects with the tuner, you'll see the name of the product after
firmware file you are loading after
File Name:.
Normally, the desired firmware file is already loaded
– you can use File/Open
button to start the loading process. You may see
several messages and the app
RUN message when the load process
ends and reboots the unit
BOOT, RUN are manual operation
s that the loader and PROGRAM
you'll rarely use them unless asked by CR Tech Support.
Update Firmware Over RF Coax
There is a separate manual for updating controllers over RF through the ICC/ICE
-
HE Head End Controller. Go to
Downloads page at the CRWWW.com website to download the correct
all iC-Net controllers
field firmware updates using a Windows PC
, a
232 null modem cable (DB7 Female to Female, TX and RX swapped at
.
is set to Unit 1 (hold Mute and Volume (or Select) Up for front
-panel
mode, then press Volume Up to select view mode 2 Unit # settings, use Channel Down button to set
the program connects with the tuner, you'll see the name of the product after
Device: and the
several messages and the app
ends and reboots the unit
.
HE Head End Controller. Go to
Downloads page at the CRWWW.com website to download the correct
Comments to this Manuals