Contemporary Research 9 232-MCT Mono Caption Tuner
RS-232 Commands
0=CATV
1=Broadcast
2=HRC
3=IRC
Set Tune Ring (TR)
Example: ‘
>2TR=2,4,7-10’
Limits access to specified channels, 120 chars max
You can use dash for sequential channels, include 126 if you are
using external AV inputs
Stores unit #2 Tune Ring as 2,4,7,8,9,10
Label Mode with Status (0-3)
Sets on-screen channel label mode. Same as TM, current mode
reflected in status, setting TM will also change Q4. (Ver 3.1)
0=None
1=Alpha only
2=Numeric only (default)
3=Both alpha and numeric labels
Channel labels are displayed overlaying the video in the top-left corner
of the screen for about 10 seconds after each channel change.
Tuner displays the channel number only.
Caption Mode Off (0-2)
Example: ‘>Q0=0’ or ‘>Q00’
Sets captioning mode
0=Captioning off (default)
1=Captioning on
2=Captioning active when volume is muted
Captioning off
Set Tune Ring (TR)
Example: ‘
>2TR=2,4,7-10’
Limits access to specified channels, 120 chars max
You can use dash for sequential channels, include 126 if you are
using external AV inputs
Stores unit#2 Tune Ring as 2,4,7,8,9,10
Select tuned channel (0-126)
Example: ‘
>TT=28’
0=video mute, 255=video unmute*
126=External AV Inputs
Selects channel 28 only if 28 is present in current TR
Force tuned channel (0-126)
Example: ‘
>TC=39’
0=video mute, 255=video unmute*
126=External AV Inputs
Selects channel 39 regardless of current TR
Selects previous channel only if present in current TR
Tune channel up
Example: ‘
>3TU’
Selects next higher channel in stored Tune Ring
Bumps Unit#3 tuned channel up one from available Tune Ring
Selects next lower channel in stored Tune Ring
Both activate the same function
Alternates Mute A/V on and off
Turn A/V outputs on at previous level
Mute A/V on
Example: ‘>XM’
Mutes A/V outputs
Mutes audio and video outputs
Comments to this Manuals