Contemporary Research 232-STA Manual Page 14

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 13
Contemporary Research 14 232-STSi PAL TV Tuner
RS-232 Control
Keypad Channel Command
If you‟re using an external control system, this command will emulate the pressing of numeric keypad buttons
for channel selection, which means you won‟t need to use extra elements for capturing channel commands in
your programming. The KC command will access any channel, KT will only access a channel stored in the
Tune Ring.
KC=0
Emulates „0‟ key, accesses any channel.
KC=1
Emulates „1‟ key, accesses any channel.
KC=9
Emulates „9‟ key, accesses any channel.
KC
Emulate „Enter‟ key, accesses any channel.
KT=9
Emulates „9‟ key, accesses channel if it exists in current Tune Ring.
KT
Emulate „Enter‟ key, accesses channel if it exists in current Tune Ring.
KD
Clears or cancels any KC or KT channel entry
After 3 seconds, with no other key, the selected channel will be tuned to. Optionally, you can have
an Enter key send the command KC or KT to select the channel immediately. Using the KD
command can cancel a channel entry before the time delay or Enter executes the channel change.
IC-RC Remote Emulation
You can also emulate IR commands sent from the CR IC-RC Wireless Remote. If you are using the numeric keys
to select a channel, the user or program will need to follow the numeric command with an Enter.
.
KK=<key>
Emulates IC-RC remote key codes
0=Release Key
9=Power (toggling)
10=0 (numeric keypad)
11=1
12=2
13=3
14=4
15=5
16=6
17=7
18=8
19=9
21=Enter
22=Channel up or +
23=Channel down or
24=Volume up or + (use Release Key (0) to stop volume ramp)
25=Volume down or (use Release Key (0) to stop volume ramp)
26=Volume mute
31= Input (toggling)
104=Top Menu (TV Standard)
106=Cursor right (Add Channel)
107=Cursor left (Delete Channel)
108=Cursor up (Search Forward)
109=Cursor down (Search Down)
115=CC
Page view 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments