Contemporary Research 232-STA Manual Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 14
Contemporary Research 15 232-STSi PAL TV Tuner
RS-232 Control
Preset Commands and Replies
$R
Request Presets
Asks for reply with list of presets stored in memory
Example:
„>$R‟ asks for list from Unit 1
Reply:
<1$TR2-31,35,52,126
$G=xxx
Preset Information
Returns preset number, freq, standard, label (1-8 characters)
Number of characters follows same structure as T status response
Example:
„>$G31‟ asks for preset 31 information
Reply:
<1$TG031,271.25,02,BBC
$N=xxx
Request Label
Asks for reply with channel text assigned to specific channel
Example:
„>$N31‟ asks for label assigned to channel 31
Reply:
<1$TN031,BBC
Terminal Communication Commands
EF
Echo Off
Characters received will not be re-transmitted (power up default).
EN
Echo On
Characters received will be re-transmitted.
Example:
>EN‟ Characters received will be re-transmitted.
ID
Product ID
Returns the product model number and software version.
Z!
Zap
Reconfigures unit for all factory default settings.
RS-232 Command Hints and Tips
Leading zeros may be included or omitted from command parameters.
Example:
>TC=009 Selects channel 9 as A/V output, same as „>TC=9‟.
Multiple commands may be concatenated as single strings up to 120 ASCII characters long.
Example:
>XXTC=9‟ Selects Mute A/V off, channel 9.
Example:
>S0=0S4=0‟ Selects CATV mode, no front panel lockout.
Mute A/V Off command is not required in any command; however it may be useful to send Mute A/V Off in case
Mute A/V had been set On from the front panel.
Sending all 3 status request commands to the 232-STSi back-to-back for a full status update is allowed.
Example:
>STSVSS‟ Returns all 3 response strings back-to-back.
The carriage return line feed at the end of each 232-STSi response allows for easy monitoring of responses with
an ASCII terminal program. You may use ASCII CR, Hex $0D, or keyboard „Enter‟ in programming.
You don‟t have to use the „=‟ character between the command and parameter the string works either way.
Page view 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments